Services
High Dusting in Oakland
Oakland Cleaning Co clears the dust from rafters, beams, ductwork, racking tops and light fixtures in Oakland warehouses, gyms, stores and atriums, working from lifts on a schedule that keeps your floor running.
Everything above arm’s reach
Dust settles wherever air goes still, and in a tall building that means the places nobody looks at until a beam of sunlight shows them. Open-web joists, roof beams, ductwork, conduit runs, pipe racks, the tops of pallet racking, high ledges, signs, exit lights and light fixtures all collect a gray layer that thickens month after month.
High dusting is the scheduled removal of that layer. Our crews start at the roof deck and work down, so each pass carries the dust lower instead of spreading it back onto surfaces that were just cleaned. Vents, return grilles and diffusers are cleaned on the face, high windowsills and clerestory frames are wiped, and the dust is captured with vacuums, extension tools and damp microfiber rather than blown into the air.
Lifts for the rooms ladders can’t reach
Warehouse bays, gym ceilings and two-story lobbies are too tall for a ladder to do the job well. For that height we work from lifts, moving the lift down each aisle or across the open floor in sections so every beam and duct run gets a close pass from arm’s length.
Lower areas, such as offices with dropped ceilings, mezzanines and the tops of shelving in back rooms, are cleaned from ladders and with extension poles in the same visit. Before work starts, we walk the route with your team to mark overhead obstructions, aisle widths and any equipment that has to stay in place, so the plan fits the building and not the other way around.
Tall Oakland buildings that gather dust
Oakland’s working buildings come in many shapes. Around the Oakland Airport Business Park, office, flex and warehouse buildings line Hegenberger Road and Edgewater Drive, and older warehouses closer to the core have been turned into studios, offices and light-industrial space with their ceilings left open. Exposed trusses look great until dust and cobwebs collect on them.
We bring high dusting to warehouses and industrial sites with stacked racking and open roof decks, plants with overhead ductwork, gyms and fitness centers where ceiling fans and heaters pull dust into the airflow, stores with open ceilings above the sales floor, and lobbies or atriums where a dusty light fixture is the first thing a visitor sees when they glance up.
Keeping falling dust off your stock
Dust that comes down has to land somewhere, so we plan for it. Pallets, finished goods, workstations, gym equipment and display tables below the work zone are covered with plastic sheeting or drop cloths before the lift goes up, and the covers come off only once the zone above is finished.
Each high-dusting visit ends with a clean-down below. The floor under the work area is dust-mopped or swept, then scrubbed where the surface calls for it, and ledges or shelves that caught stray dust are wiped. Buildings that want a deeper floor result the same week can add scrubbing or burnishing through our commercial floor care, so the room looks finished from the rafters to the slab.
Scheduled around shifts, receiving and opening hours
A lift in an aisle needs room to work, and your operation needs to keep moving. We break large buildings into zones and clean one zone at a time, coordinating with your supervisor so a section is clear before we start and released as soon as we finish.
Most high dusting happens at night, on weekends or during a planned shutdown. Warehouses often book it between receiving windows, gyms in the early-morning hours before the first class, and stores after closing. One-time visits are common before an inspection, an audit walk, a grand reopening or a lease turnover, and after a build-out, high dusting pairs naturally with post-construction cleaning to clear the drywall and sawdust that settles on new ductwork and beams.
How often high dusting should be done
Frequency follows how fast dust builds. Offices, clinics and quieter stores usually stay ahead of it with high dusting of ledges, vents and fixtures once a quarter. Busy warehouses, plants with constant forklift traffic, and gyms with fans running all day often move to a monthly schedule for the worst areas, with the full ceiling on a longer cycle.
During the first visit we note where dust collects fastest, such as the racking near dock doors or the beams above an air handler, and suggest a rhythm that targets those spots more often and leaves the quieter areas on the standard cycle. You get a written plan you can adjust as seasons, inventory levels or building use change.
What sets the price of high dusting
Each quote is built from your building rather than a flat rate. The main factors are ceiling height, the square footage of the area overhead, how densely the racking, ductwork and equipment are packed, whether lifts are needed and how many, how much has to be covered below, the time windows we have to work in, and how often you want the service repeated.
We walk the space with you, look up as well as around, and send a written quote listing the surfaces, the zones and a suggested schedule. Recurring high dusting can be added to an existing janitorial plan or booked as its own service.
A few useful answers
Common questions
What does high dusting mean for a warehouse or gym?
High dusting is cleaning the surfaces above normal reach, such as rafters, beams, ductwork, pipes, racking tops, ledges, signs and light fixtures. Crews work from the top down with lifts, ladders and extension tools and capture the dust as they go.
How often does a tall building need high dusting?
Most offices and stores do well with a quarterly visit. Busy warehouses, plants and gyms usually need the dustiest areas cleaned monthly, with the rest of the ceiling on a longer cycle we set after the first walkthrough.
Which surfaces does a high-dusting visit cover?
A standard visit covers beams, joists, ductwork, conduit, racking tops, high ledges, vents and return grilles, exit signs and light fixtures, plus covering stock and equipment below and cleaning the floor under each work zone when the zone is done.
Can you dust above our racking without shutting down the warehouse?
Yes. We work zone by zone at night, on weekends or between receiving windows, so most of the building keeps operating while one section is cleaned and handed back.
How do you keep dust off the pallets and equipment below?
Your stock stays protected. Pallets, goods and equipment under the work area are covered before the lift goes up, and the area below is cleaned once each zone is finished.